รายละเอียดเพิ่มเติม

Grundfos : NKG 50-32-160.1/177 A1F2BE-SBQQE

Product No.: 96890215

Non-self-priming, single-stage, centrifugal pump designed according to ISO 5199 with dimensions and rated
performance according to ISO 2858. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an
axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the
motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework.
The pump is fitted with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common
base frame.
The product’s minimum efficiency index (MEI) is greater or equal to 0.70. This is by the Commission Regulation (EU)
considered as an indicative benchmark for best-performing water pump available on the market as from 1 January
2013.
Pump and motor are mounted on a common steel base frame in accordance with ISO 3661. The back pull-out design
makes it possible to make service on the pump when the pump housing is still connected to the inlet and discharge
pipes.
.　1) Remove the bolts in the bearing bracket support foot and motor foot.
.　2) Remove the bearing bracket and the motor from the pump housing.

Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint particles as a thin, well-controlled layer on the surface.

Pump
The pump housing has both a priming and a drain hole closed by plugs. The impeller is a closed impeller with
double-curved blades with smooth surfaces. The impeller is statically balanced according to ISO 1940-1 class G6.3
and hydraulically balanced to compensate for axial thrust.

Wear rings used in pump housing and for impeller are made of bronze/brass.
The shaft is made of stainless steel and has a diameter of 24 mm where the coupling is mounted.
The pump uses a standard coupling between the pump and motor shaft.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards and mounting
designation B3 (IM 1001). Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The protection
reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the automatic reset
cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according to local
regulations.

The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point.
Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos Product Center.