หมวดหมู่ ป้ายกำกับ ,

รายละเอียดเพิ่มเติม
Grundfos CM5-5 Grundfos CM5-5 Grundfos CM5-5 Grundfos CM5-5

Grundfos : CM 5-5 A-R-A-E-AVBE F-A-A-N

Product No.: 98694013

Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and discharge parts are made of cast iron. The mechanical shaft seal is a special designed, unbalanced O-ring seal. Pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1).

The pump is fitted with a 3-phase, foot-mounted, fan-cooled asynchronous motor.

Further product details
Pump and motor are integrated in a compact and user-friendly design. The pump is fitted to a low base plate, making it ideal for installation in systems where compactness is important.

The state-of-the-art design and materials of the shaft seal ensure high wear resistance, improved sticking and dry-running capabilities and long operating life.

Servicing the pump requires no special service tools. Service parts are in stock for quick delivery and are available as kits, single parts or bulk. Service videos are available on www.youtube.com.

Pump
A combination of a stop ring and a Nord-lock® washer secures a tight and reliable fixation of the impeller spacing pipes to the splined pump shaft. It is possible to remove and fit the hydraulic parts from the pump side. The inlet part, chambers and discharge part are hold together by four staybolts.

The pump is fitted with an unbalanced O-ring seal with a rigid torque-transmission system. It has a fixed seal driver ensuring a reliable rotation of all parts. The dynamic secondary seal is an O-ring.

Primary seal:
• Rotating seal ring material: aluminium oxide (alumina)
• Stationary seat material: carbon graphite, resin-impregnated

Carbon graphite against alumina is a good all-round seal for not too demanding applications. The corrosion resistance is often limited in water to a range between pH 5 and pH 10. Usage in liquids above 90 °C is not recommended. The seal can handle dry-running conditions for short periods.

Secondary seal material: EPDM (ethylene-propylene rubber) EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be dismantled.

Motor

The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN 50347. Electrical tolerances comply with EN 60034.

The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1. An installation indicator is fitted to the motor fan cover. Based on the motor cooling air, it indicates the direction of rotation of the motor. The motor is fitted with a directional sticker.

Technical data
Controls
Frequency converterNONE
Liquid
Pumped liquidWater
Liquid temperature range-20 .. 90 °C
Selected liquid temperature20 °C
Density998.2 kg/m³
Technical
Pump speed on which pump data are based2900 rpm
Rated flow10 m³/h
Rated head40.51 m
Code for shaft sealAVBE
ApprovalsCE,WRAS,ACS,EAC
Curve toleranceISO9906:2012 3B
Technical
Pump housingCast iron
EN-GJL-200
ASTM A48-25A
ImpellerStainless steel
EN 1.4301
AISI 304
Installation
Range of ambient temperature-20 .. 55 °C
Maximum operating pressure10 bar
Max pressure at stated temp10 bar / 40 °C
6 bar / 90 °C
Type of connectionRp
Size of inlet connection11/2 inch
Size of outlet connection11/2 inch
Outlet position12
Electrical data
Motor standardIEC
Frame size90LE
IE efficiency classIE3
Rated power – P22.2 kW
Mains frequency50 Hz
Suitable for 50/60 HzN
Phases3
Rated voltage220-240D/380-415Y V
Service factor1.0
Rated current8.00/4.60 A
Starting current840-920 %
Rated speed2890-2910 rpm
Enclosure class (IEC 34-5)IP55
Insulation class (IEC 85)F
Built-in motor protectiontdNONE
Cable included (Yes/No)N
Others
Terminal box position12
Minimum efficiency index, MEI ≥0.7
Net weight35 kg
Gross weight37.5 kg

Privacy Preference Center