THAI PP-R PROLYPROPYLENE PIE&FITTING

ท่อไทยพีพี-อาร์ผลิตตามมาตรฐานเยอรมัน โดยใช้เม็ดพลาสติก PP-R (80) ชั้นดี ของยุโรป จึงทำให้ มีเนื้อพลาสติกที่มีคุณภาพ และความหนาแน่นสูง แสงลอดผ่านไม่ได้ จึงมั่นใจได้ว่า ท่อ ไทยพีพี-อาร์ จะปราศจากสารก่อมะเร็ง สนิม หรือ โลหะหนักต่างๆ ที่อาจปนเปื้อนมาจากท่อและข้อต่อที่ผ่านการใช้งานมาแล้ว การเชื่อมต่อระหว่างท่อและข้อต่อจะใช้วิธีการให้ความร้อนทำให้สามารถเชื่อมผสานกันเป็นเนื้อเดียว (Homogenized) จึงมั่นใจว่าจะไม่เกิดปัญหาการรั่วซึม ที่บริเวณจุดต่อเชื่อม แข็งแรงสูงสามารถทนแรงดันได้สูงถึง 20 บาร์ อายุการใช้งานยาวนานถึง 50 ปี แบ่งท่อได้ 3 ประเภทตามลักษณะการใช้งาน ได้ดังนี้

1) PP-R (80) แบบ SDR 11 (PN10) ECONOMY CLASS ; อายุการใช้งาน 50 ปี , อุณหภูมิการใช้งานที่ 3-60 °C
สามารถรับความดันได้ประมาณ 10 bars

2) PP-R (80) แบบ SDR 6 (PN20) HIGH PRESSURE CLASS ; อายุการใช้งาน 50 ปี , อุณหภูมิการใช้งานที่ 3-95 °C
สามารถรับความดัน ได้ประมาณ 20 bars

3) PP-R (80) แบบ SDR 6 (PN20) DURABLE CLASS ; อายุการใช้งาน 50 ปี , อุณหภูมิการใช้งานที่ 3-95 °C
สามารถรับความดัน ได้ประมาณ 20 bars

นอกจากนี้ ยังมีข้อต่อหลากหลายชนิด จึงสะดวกต่อการใช้งาน โดยข้อต่อทุกตัวแข็งแรง ทนต่อแรงดัน ( Permissible Working Pressure)
ได้ถึง 20 bar และใช้งานได้ถึง 95 °C

จุดเด่นของท่อและข้อต่อ THAI PP-R

1) ราคาไม่แพง คุ้มค่าการลงทุน

2) ติดตั้งง่ายโดยใช้วิธีการสวมเชื่อม ( Funion process ) ดังนั้นท่อและข้อต่อสามารถประสานเป็นเนื้อเดียวกันได้ ทำให้ไม่เกิดการรั่วซึม

3) มีท่อและข้อต่อหลากหลายประเภท และสามารถทนแรงดันสูงสุด 20 bars

4) PP (POLYPROPYLENE) เป็นพลาสติกที่สะอาด ปราศจากสารก่อมะเร็ง สนิม หรือโลหะหนักต่างๆ ปนเปื้อนมาด้วย

5) อายุการใช้งาน 50 ปี (ในที่ร่ม)

6) ทนสารเคมี

Strength of the Thai PP-R System
1) World class material: All Thai PP-R pipes and joints are made of high quality plastic pellets from Europe to ensure
high quality and long life time
2) Light weight: weighs only 0.89-0.91 g/cm3 or 8 times lighter than Class M steel, making it easy for installation
and transportation.
3) Resistance to hot water system: can be used with up to 95°C water for 50 years under a specified working pressure
4) Clean and safe: approved by Green Peace as safe and clean plastic. In addition, the pipe has been tested according to BS 6920 PART II standard to ensure that the pipe is free from rust, sediment deposits, germs, chemicals, and carcinogens.
standard to ensure that the pipe is free from rust, sediment deposits, germs, chemicals, and carcinogens.
5) Homogeneous texture: Installation of Thai PP-R pipes and joints can be easily done by using thermal welding equipment, which fuses the pipe and the joint into homogeneous texture to ensure no leak at the connection.
6) Smooth surface: Low friction in the pipe due to it’s smooth plastic surface makes the flow rate comparable
to other plastic pipes.
7) Compatible with other pipes: Various standardized screwed joints allow the Thai PP-R pipe to be used with other pipes.
8) Insulation property: As polypropylene plastic has lower thermal conductivity than steel, the Thai PP-R pipe
requires much less insulation than a steel pipe does.
8) Insulation property: As polypropylene plastic has lower thermal conductivity than steel, the Thai PP-R pipe
requires much less insulation than a steel pipe does.
9) Environmental friendly: PP-R is a safe and thermo plastic so it can be recycled with no harm to the environment.


Products Range


banner 4 uai

– PP-R (80) แบบ SDR 11 (PN10) ECONOMY CLASS
– PP-R (80) แบบ SDR 6 (PN20) HIGH PRESSURE CLASS
– PP-R (80) แบบ SDR 6 (PN20) FIBER COMPOSITE PIPE / DURABLE CLASS
– FUSION PROCESS Thai PP-R
– ตารางเวลาการให้ความร้อน

1 3

Usage : Potable water piping system, chilled water piping system, warm water piping system, or other piping systems
Working temperature : 3-60 degree Celsius,
Length per pipe : 4 M.
Working pressure : 10 Bars,
Standards : DIN 8077/78 and ISO 15874
Lifetime : 50 years*, Physical appearance : Green

2 3

Usage : Potable water piping system, chilled water piping system, warm water piping system, or other piping systems
Working temperature : 3-80 degree Celsius,

Length per pipe : 4 M.
Working pressure : 20 Bars,
Standards : DIN 8077/78 and ISO 15874
Lifetime : 50 years*, Physical appearance : Green

3 3

Usage : Potable water piping system, chilled water piping system, warm water piping system, or other piping systems Working temperature : 3-950 degree Celsius,
Length per pipe : 4 M.
Working pressure : 20 Bars,
Standards : DIN 8077/78 and ISO 15874
Lifetime : 50 years*,Physical appearance : Green,
Reduced longitudinal and horizontal expansion

4 2 uai

1. CUT ; Cut the pipe at the right angles to the pipe.
Take care that the pipe axis is free from burrs or cutting debris and remove where necessary.
2. MARK; Mark the welding depth at the end of the pipe
with the enclosed pencil and template.

3. HEAT ; Push the end of the pipe up to the marked welding depth into the welding tool.

4. WELD; Join them immediately, without turning, until the marked welding depth is covered by the bead of PP
from the fitting.